Analysis of maintenance skills from music fountain company
Analysis of maintenance skills from music fountain company
As the weather in the north gets colder and colder, music fountains in many places have stopped spraying. But just stopping the spraying is not enough, the fountain equipment needs to be maintained. Especially the fountain pump, if it is not maintained for a long time, it will be damaged, and changing to another one will cause great loss. So, how to maintain the fountain pump? Next, let's take a look at the fountain design company.
1. Regularly check whether there is any looseness in the joint between the fountain pump and the pipeline;
2. The bearing lubricating oil should be added to the bearing body of the fountain pump regularly. If the lubricating oil has been used for a long time, it should be replaced in time;
3. The fountain design company reminds you that if the fountain pump is out of service for a long time, you need to disassemble the pump body, wipe off the water inside, and apply grease to the rotating parts and joints, and then install and store it.
4. After a long period of inactivity, when you start the motor again, check whether the rotation of the motor is correct. If it is not correct, make timely adjustments. After the fountain pump is running normally, look at the pressure gauge to show proper pressure and then gradually open the gate valve, and check the motor load at the same time.
5. When the fountain pump is working, it is necessary to control its flow and head within the range indicated on the label to ensure that it can operate at the efficiency point and finally obtain the energy-saving effect.
6. During the operation of the pump body, the bearing temperature should not be lower than 35℃, but the temperature should not exceed 80℃.
7. If the fountain pump is to be stopped, the gate valve and pressure gauge must be closed before stopping the motor. If the pump body makes an abnormal noise during operation, stop it immediately and check the cause. If you cannot find the name for the reason, you can ask a professional fountain design company to come and have a look.
8. It is necessary to adjust the packing gland frequently to ensure that the leakage in the packing chamber is normal; check the wear of the shaft sleeve regularly, and replace it in time if the wear is serious.
Of course, in addition to the points introduced above, there are many more maintenance of fountain equipment. Only by doing the usual maintenance work can the fountain equipment operate for a long time. In the future, more and more places need fountain equipment.
To know more, welcome to caontact us!
www.rainbowsfountain.com
Guangzhou Shuiguang Fountain Equipment Co.,Ltd
Address: 14th Floor, Block F, Jianshe Building, 123 Yanling Rd., Tianhe District
Producing base: Hongcai center, Lingshan Miaobei Industrial Zone, Da Gang Town, Nansha District, Guangzhou.
